Slice Engineering Mosquito Hot Block Hardware

Slice Engineering Mosquito Hot Block Hardware

Slice Engineering Mosquito Hot Block Hardware – Standard / Magnum / Liquid is used to mount the Hot Block to the Heat Sink in the Mosquito® Hotend, Mosquito® Magnum Hotend, and Mosquito® Liquid Hotend. This variant includes:

• (4x) Standoff tubes to separate Hot Block from Heat Sink (or Liquid Base)

• (2x) M1.4 socket head cap screws with threadlocker to attach Hot Block to Heat Sink (or Liquid Base)

• (2x) M3 socket head cap screws to retain heater cartridge and temperature sensor inside Hot Block

Hot Block Hardware – Magnum Plus is used to mount the Hot Block to the Heat Sink in the Mosquito® Magnum+ Hotend. This variant includes:

• (4x) Standoff tubes to separate Hot Block from Heat Sink (or Liquid Base)

• (2x) M1.6 socket head cap screws and serrated safety washers to attach Hot Block to Heat Sink (or Liquid Base)

• (6x) M2.5 socket head cap screws (length 4) to retain heater cartridge(s) and temperature sensor(s) inside Hot Block

• (1x) M2.5 socket head cap screw (length 8) to cover hole otherwise used for optional Nozzle Insulator