Which Hot End Should I Choose?
The Slice Engineering Mosquito hotend and Copperhead hotend are amazing and share some similarities. They both prevent heat creep, jams, allow increased printing speeds, and they both share the same bimetallic technology used to produce their heat breaks. They are also both beautifully designed and crafted in the US.
Even though they carry many similar characteristics each was designed for different end users. The Copperhead hot end is more like the traditional hot end upgraded with better materials to offer better performance and is suited for the majority of 3D Printers out there. With it’s modular design many parts are cross compatible with other components so you can mix and match. Only the Copperhead heat sink requires that you must purchase the standard heat break for compatibility reasons.
The Mosquito hot end is on another level. It’s the best of the best. It was radically redesigned from the ground up offering unmatched performance. It offers a protective roll cage around the most thermally efficient heat break (85%) available on the market! The design of the hot end also allows for one handed cold nozzle changes as an added feature to it’s incredible performance boost.
Ask us how does Slice Engineering Mosquito and Copperhead hot ends outperform the competition!
Print like a pro with Slice Engineering hotends.
Better By Design
Mosquito Spare Parts
Slice Engineering Mosquito Hotend Mounting Hardware$4.13 + Tax (USD) Add to cart
Which Heatbreak Do you Need?
The Copperhead hotend was designed to be very modular and able to be retro fitted to just about any 3D Printer on the market. If you want a whole hot end replacement then start from the Copperhead heat sink, add the bimetal heat break, and heater block. You can also decide to just replace the heatbreak or just the heater block. You are in control of what you want to upgrade on your current setup but to get the best performance a matching set is advised.
Standard Heatbreak G2
Copperhead™ Heat Sink & Raise3D Pro2
RepRap 1.75 Heatbreak
E3d Titan, E3D v6, E3D Volcano, Prusa MK2/MK2S/MK3/MK3S, Artillery Sidewinder X1 v1/v2/v3
Lulzbot Taz 6 Hexagon, Makerbot Replicator 1/2, MK8 Hot Ends
Monoprice Maker Select 3D Printer V2, Wanhao i3/Duplicator 4X/Duplicator 4S, Qidi Tech X-Pro/I, PowerSpec 3D Pro/3D X/Ultra Printer, MakerGear M3/M2 Series, FlashForge Creator Pro/Creator X/Dreamer, Dremel Idea Builder, Cocoon Create 3D Print
Creality CR-10/CR-10 Mini/CR-10 S4/CR-10 S5/CR-10S, Creality Ender 3/Ender 3 Pro, Creality Ender 5/Ender 5 Plus/Ender 5 Pro
C-Pro Max Heatbreak
Creality CR-10 Max/CR-10S Pro/CR-10S Pro v2
Bondtech LGX eXtruder
Copperhead Heat Sink and Heater block
Slice Engineering Copperhead Heat Sink Screw Mount G2$45.41 + Tax (USD) Add to cart
Slice Engineering Copperhead Heat Sink Groove Mount G2$45.41 + Tax (USD) Read more
What does the man of steel Superman have in common with Slice Engineering Vanadium nozzles? They are both virtually indestructible. Slice Engineering went a little overboard when they made their Vanadium nozzles. They are hardened and tempered to 65 Rockwell C all the way through the substrate and not just the surface. They are hard to the core and crafted from vanadium-alloyed high speed steel for superior abrasion resistance at any temperature.
They are so tough they offer a lifetime warranty against abrasion!
It will be the last nozzle you ever need to buy!
- Sale! Out of stock
Achieve peak bridging performance with the BridgeMaster® Nozzle! The increased thermal conductivity of our copper alloy, carries heat efficiently all the way to the nozzle tip, enabling you to maximize part cooling, without worrying about decreasing filament temperature at the nozzle tip.
Slice Engineering High Temp Thermistor Cartridge 300C$29.51 + Tax (USD) Add to cart
Slice Engineering RTD PT1000 Thermistor Cartridge 500C$29.88 + Tax (USD) Read more
Slice Engineering Extension Cable for Fan or Thermistor$2.99 + Tax (USD) Add to cart
Slice Engineering Mosquito Magnum Plus Convection Shield$44.66 + Tax (USD) Add to cart