GDSTIME 3007 Sleeve Axial Fan 5v DC

**These fans are slightly under spec for the Voron 0.1 tool head as the build calls for a fan that is at least 3.5CFM.
If this is for a Voron 0.1 tool head this is the recommended fan to use GDSTIME 3007 Ball Bearing Axial Fan

GDSTIME 3007 Sleeve Axial Fan 5v DC, 3.24CFM, 0.15A, 30dBA, 10,000RPM, 25cm Lead Wires with JST XH 2.54 connectors. Great for cooling a Raspberry Pi.

Manufacturer part#: GDA3007
Supplier: GDSTIME
Cable Length: 25cm with JST XH 2.54 connectors
Type: Axial
Height: 30mm
Width: 30mm
Depth: 7mm
Current Type: DC
Current: 0.15A
Voltage: 5v
Airflow: 3.24CFM
Air Pressure: 0.19 InH20
Speed: 10,000RPM
Bearing Type: Sleeve
Noise: 30dBA
Life: 50,000 hours