Bondtech DDX v3 Adapter Set for CR-10v2 & CR-10v3

Bondtech DDX v3 Adapter Set for CR-10v2 & CR-10v3

The Bondtech DDX v3 adapter set is necessary to install a DDX Upgrade Kit on the Creality CR-10(S) Pro/Max and requires your printer to have a 40x40x20mm Radial Fan.

• Compatible with DDX v3, now even easier to install;
• Fit a Direct Drive eXtruder on the CR-10 v2 and CR-10 v3;
• Plastic Parts made of PA12 (Nylon) with the SLS 3D printing process;
• Better surface finishing and higher working temperature resistance;
• Improved bowden and Z-axis end switch support.

CR-10S V2 and CR-10 v3 Compatibility

To use this Adapter Set on the printer models mentioned above, you just need the default DDX V3 configuration : Bondtech DDX V3 Direct Drive eXtruder for Creality.

All DDX hotend and bed levelling sensor adaptors are compatible with this setup. Keep in mind, when it comes to the bed levelling sensor, using one of our adapters will change the position of the probe. A change in the firmware may be required.

To use the DDX V3 on your CR-10 v2 or v3 a hotend upgrade is required.
Available options are:

• Copperhead™;
• Mosquito™;
• Mosquito™ Magnum;
• Micro Swiss All Metal.

Install the hotend and hotend adapter inside the DDX V3 before applying the DDX Mount Plate