Bondtech LGX ACE Mosquito Hotend
**Does not included LGX Extruder**
Designed for rigid and flexible materials…
… and improved cooling capacity.
- Is easier to cool down and to install;
- Allows higher Volumetric Flow Rate;
- Supports rigid, flexible and soft materials;
- Prints flexible and soft materials faster;
- Forms a small and light yet robust print-head.
- Allows for one hand nozzle change
By Bondtech and Slice Engineering
This Bondtech LGX ACE Mosquito hotend is a special short filament path hotend, co-developed by Bondtech and Slice Engineering, to be used with the LGX eXtruder.
It features Slice’s Mosquito bi-metallic heat-break technology and Copper hot block for improved thermal performance.
Pairing it with the LGX forms a print head that will excel at printing ALL most common materials and especially the soft and flexible.
Engineered To Give More Flow
During the long months of deep testing that preceded the launch of the LGX CHT nozzles, Bondtech discovered that shortening the post-drive filament path generates increased volumetric flow rate capacity. Similar to the LGX Shortcut Mosquito, the LGX ACE Mosquito delivers that same increase when comparing to the full Mosquito hotend.
Designed To Be Cooler
The LGX ACE Mosquito Hotend features a monolithic air-cooled cold block and heat sink, designed and manufactured by Bondtech, that engages with the LGX extruder using its interface plug and rests at the front of the extruder. The heat sink includes the hole pattern for attaching 40×40 fans.
Our tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, due to the monolithic design of the cold block and heat sink that increases heat transmission and dissipation.
- 1x LGX Black Anodized Aluminum Monolithic Cold Block and Heat Sink
- 1x Mosquito LGX Heat Break
- 1x Mosquito Hot Block
- 1x Bondtech M6x1x7.5 Coated Brass Nozzle 0.4mm
- 1x Silver Based Thermal Paste Sachet 0.5g
The LGX ACE Mosquito Hotend is not compatible with the following items:
- 3DSolex Matchless 1.75mm nozzles.