LDO Voron v2.4 R2 300mm Kit
**THIS KIT INCLUDES**
- Bigtreetech CB1 and Pi4B adapter. Faster then a Raspberry Pi3B!
**THIS KIT DOES NOT INCLUDE**
- Hot End
- Printed Parts
Here are some great unboxing and build videos for the LDO Voron v2.4 R2 Kit
Nero3dp
Steve Builds
Maple Leaf Makers
Features & Extras
- V2.4r2 Compatibility – Our kit is designed to be compatible with V2.4 Rev2.
- Stainless Steel Linear Rails – 12H size rails for X axis included. No more worrying about rusty rails. Remember to properly lubricate your linear rails!
- Toolhead PCB – Our kit includes a modified Hartk toolhead PCB. In addition, we designed a toolhead breakout PCB to make wiring at the controller end simple and straightforward.
- Brass Heatset Insert Tool – We’ve included a custom machined brass tip for your soldering iron, use it to install heat set inserts with ease! Check here for more information.
- Input Shaper Tool– We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.
- Pre-cut & Pre-wired – Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See our detailed wiring guide here.
- LED Lighting – Bring lighting to your Voron with included LED strips and all necessary wiring!
- Nevermore Filter – We include parts for an optional internal circulation filter: the Nevermore Micro V5 by 0ndsk4 (carbon pellets not included due to shipping restrictions).
- Klicky Mod – Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional Klicky mod by jlas1.
- Small Tools – We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.
- 2mm Drill Bit – Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.
- Click here for full BOM of parts included in kit
Guides
- Printed Parts Guide (LDO supplement) – Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.
- Wiring Guide – We created this supplementary wiring guide to go along with the included cable kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components.
- Tuning Guide – We highly recommend reading over this very detailed tuning guide by Ellis to help print out the best possible looking parts.
- Cable Chain Guide – See our short guide here for tips on our included cable chains (also known as drag chains).
- UK2.5 Terminals – See this short guide for tips on using the UK2.5 terminals included in our kits.
- Check out Nero 3DP or Steve Builds Youtube channel as they have great videos on how to build a Voron.
Tips
- Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_2_questions channel.
- Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when you encounter anything in the manual that is ambiguous or unclear.
- Check out Nero 3D and Steve Build‘s Youtube channels, both are part of the Voron team and have tons of useful videos for building Vorons.
- Print a Voron Cube, then print a Steppy!
- Get a serial number once you finish building your Voron.
Dracomagus79 (verified owner) –
I bought my kit here, everything came in undamaged and very quickly, like everything else I have ordered here since then. Everytime a I had question about this or another product, I received very quick and proper answers! Thumbs up, this is too quality items and consumer service!! Will order again for sure!!