Voron 2.4 Fasteners Kit

Our Voron 2.4 fasteners kit includes everything you will need for your build. We also include extras so you will have more than enough for the build. We took the quantities from the BOM and added extra so you will have some spares for any mods you may want to do afterwards. Our screws are made from high quality black carbon steel grade 12.9 for strength and durability.

Stainless steel fasteners have a much lower yield strength. Since they made with an alloy there is no definitive way to tell what the min yield strength is but typically range from  138 – 448 Mpa. Grade 12.9 Steel  is quenched then tempered and has a min yield strength of 1100 Mpa. More than double the strength of the Stainless Steel making these much less likely to strip!

The roll in T Nuts included fit LDO extrusions and have been tested. Easiest way to install these is to insert an allen key into the hole and roll them in or you can pre load these into the frame as you are building.

Includes

Qty 235 – M3x8 (SHCS) Socket Head Cap Screw
Qty 43 – M3x12 (SHCS) Socket Head Cap Screw
Qty 40 – M3x16 (SHCS) Socket Head Cap Screw
Qty 49 – M3x20 (SHCS) Socket Head Cap Screw
Qty 45 – M3x30 (SHCS) Socket Head Cap Screw
Qty 48 – M3x40 (SHCS) Socket Head Cap Screw
Qty 42 – M5x40 (SHCS) Socket Head Cap Screw

Qty 26 – M3x6 (BHCS) Button Head Cap Screw
Qty 24 – M4x6 (BHCS) Button Head Cap Screw
Qty 60 – M5x10 (BHCS) Button Head Cap Screw
Qty 47 – M5x16 (BHCS) Button Head Cap Screw
Qty 42 – M5x30 (BHCS) Button Head Cap Screw

Qty 35 – M2x10 Self Tapping Screw for Plastics

Qty 67 – M3 Hammer Head T-Nuts (For 2020 extrusions)
Qty 140 – M3 Roll in T-nut (For 2020 extrusions)
Qty 81 – M5 Roll in T-nut (For 2020 extrusions)

Qty 27 – M3 Hexnut
Qty 46 – M5 Hexnut
Qty 62 – 5x10x1 Shim Ring
Qty 110 – M3 Heat Set Inserts (M3x5x4)
Qty 22 – M3 Washer
Qty 24 – M4 knurled nut