Voron Trident Fasteners Kit

Our Voron Trident fasteners kit includes everything you will need for your build. We also include extras so you will have more than enough for the build. We took the quantities from the BOM and added extra so you will have some spares for any mods you may want to do afterwards. Our screws are made from high quality black carbon steel grade 12.9 for strength and durability.

Stainless steel fasteners have a much lower yield strength. Since they made with an alloy there is no definitive way to tell what the min yield strength is but typically range from  138 – 448 Mpa. Grade 12.9 Steel  is quenched then tempered and has a min yield strength of 1100 Mpa. More than double the strength of the Stainless Steel making these much less likely to strip!

The roll in T Nuts included fit LDO extrusions and have been tested. Easiest way to install these is to insert an allen key into the hole and roll them in or you can pre load these into the frame as you are building.

Includes

Qty 149 – M3x8 (SHCS) Socket Head Cap Screw
Qty 75 – M3x12 (SHCS) Socket Head Cap Screw
Qty 27 – M3x16 (SHCS) Socket Head Cap Screw
Qty 20 – M3x20 (SHCS) Socket Head Cap Screw
Qty 35 – M3x30 (SHCS) Socket Head Cap Screw
Qty 15 – M3x40 (SHCS) Socket Head Cap Screw
Qty 20 – M5x40 (SHCS) Socket Head Cap Screw

Qty 44 – M3x6 (BHCS) Button Head Cap Screw
Qty 15 – M4x6 (BHCS) Button Head Cap Screw
Qty 65 – M5x10 (BHCS) Button Head Cap Screw
Qty 50 – M5x16 (BHCS) Button Head Cap Screw
Qty 16 – M5x30 (BHCS) Button Head Cap Screw

Qty 25 – M2x10 Self Tapping Screw for Plastics
Qty 24 – M3x6 (FHCS) Flat Head Cap Screw
Qty 20 – M3x12 (FHCS) Flat Head Cap Screw

Qty 75 – M3 Hammer Head T-Nuts (For 2020 extrusions)
Qty 92 – M3 Roll in T-nut (For 2020 extrusions)
Qty 79 – M5 Roll in T-nut (For 2020 extrusions)

Qty 17 – M3 Hexnut
Qty 25 – M5 Hexnut
Qty 30 – 5x10x1 Shim Ring
Qty 60 – M3 Heat Set Inserts (M3x5x4)
Qty 20 – M3 Washer
Qty 6 – M4 knurled nut