3D Lab Tech

E3D Silicone Pro Sock for V6 Heater Block

$1.84 + Tax (USD)

Free Shipping in Canada for orders over $100 before tax.

Availability: In stock

Category: Tag:

E3D Silicone Pro Sock for V6 Heater Block

**This is for the purchase of qty 1 Silicone Sock**

These are silicone pro sock for V6 heater block for high-temperature non-stick, suitable for use with V6-style heater blocks and nozzles. Best suited for use with high-resolution nozzles and specific professional applications.

Original high-temperature non-stick silicone sock for E3D V6 and other HotEnds also using the E3D V6 style heater block with thermistor cartridges. These socks are intended for use in set-ups where keeping the heater block AND nozzle fully insulated is desirable. We recommend using these socks with our 0.15mm nozzles.

These silicone pro socks for V6 heater block will keep your nozzle clean and free of burnt on blackened plastic. They don’t just keep the nozzle clean, but also keep heat inside the HotEnd, and off the print.

Made of a heat-resistant, non-stick silicone material we will repel the build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.

These silicone pro socks for V6 heater block also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boosts the ability to print great overhangs and bridges, all while keeping the HotEnd temperature extremely stable.

The covers simply push onto the front of the HotEnd with no disassembly – they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the HotEnd snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm

Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse, they should easily last 100+ print hours. With less sticky materials like ABS and gentler use, you can get almost infinite life. Your mileage may vary.






Weight0.01 kg
Dimensions1 × 1 × 1 cm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.