LDO Voron v0-S1 Kit

The LDO Voron v0-S1 Kit is everything you need to build a 3d printer except for the printed parts!

The Kit includes Bigtreetech CB1 and Pi4B adapter. Faster then a Raspberry Pi3B!

Revo Voron now included in the kits. Also included are 2 nozzles 0.4mm and 0.6mm!!!

**For color selection I have Red, Blue, Space grey kits as a full set (Same frame and Kirigami colors)**
Please DM me if you are ok to mix colors for example Orange Frame and Space Grey Kirigami bed. I can do this as well.

Here is a great unboxing and build video for the LDO Voron 0-S1 kit by Steve Builds

FEATURES & EXTRAS

• Slide-in M3 nuts
  Anyone who has built a V0 before knows this feeling: you’ve almost reached the end of the build, and suddenly realize that you missed a preload nut. Now you have to take apart the entire printer just so that you can insert a single missing nut. Our slide-in M3 nuts solve this very problem.
• Kirigami Bed Mount
  Many of you are already familiar with famous Kirigami mod by Christoph Mueller. LDO has already released hundreds of Kirigami kits into the wild, so it’s only natural for these to be baked into our Voron 0 kits. Why do you want this mod? Well the biggest reason for me is maintainability. With the original V0 bed mount, removing and modifying the buildplate, or the wires/cable chain connected to the build plate was extremely difficult. What if the thermal fuse blew? What if I want to install a different buildplate? Kirigami solves all of these issues and more. Not to mention our kirigami comes with a Neopixel front light!
• Polyimide Film Heaters and 200W Power Supply
  The inspiration to use a polyimide (a.k.a. PI) film heater came from our friend Róbert Lőrincz and his Orbitron printer project. His experiemental data convinced us that this type of heater is the way to go. Polyimide heaters are thin and light and can be easily cut to different shapes. We’ve designed our heaters shapes so they cover as much area as possible with the build plate. Some of you may know that with the original buildplate, there is a large descrepancy between the reported and actual top surface temperature. The thinness of the PI heater allows us to embed a thermistor directly into the buildplate – which makes for far more accurate temperature readings.
• Picobilical
  We are excited to introduce the Picobilical PCB mod. Picobilical is an in-house PCB design that iterates on the Tim Abraham’s V0 umbilical mod. Picobilical greatly simplifies and modularizes wiring of the Voron 0 toolhead. One of the biggest features of Picobilical is the addition of an RP2040 microcontroller. The microcontroller handles nearly all controls related to the printer toolhead so that wiring to the mainboard is kept to a minimum. As a side benefit, a large number of ports are freed up on the mainboard (mods anyone?) You can read more about Picobilical here.
• E3D Revo™ Hotend
  E3D Revo hotends will be included in all V0-S1 kits. We have collaborated with folks at E3D to bring the Revo Voron hotend to our Voron kits, starting with V0-S1.
  Qty 2 nozzles included in this kit! Both 0.4mm and 0.6mm.
• HIWIN linear rails for X axis
  In the past year and a half, we’ve received reports of slightly wobbly rails on the X axis. To remedy this potential issue, we’ve decided to replace our standard X axis linear rail with a stainless steel HIWIN rail.
• SKR Pico board (LDO branded Edition)

For complete full BOM list please refer to LDO site here